冷却水污垢及其对冷却器换热的影响

分析了冷却器的结垢机理 ,提出了冷却器污垢层、污垢热阻随运行时间的规律 ,以及污垢热阻与换热系数、换热面积的关系式 ,并通过算例阐述了污垢热阻对冷却器的影响程度 ,进而定性地分析了污垢热阻对空分装置的影响。     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

非洲油气勘探区战略选择建议

非洲不同类型的沉积盆地主要可归纳为：古、中生代挠曲盆地，中、新生代大陆边缘断陷盆地，板内裂谷盆地和大陆边缘进积三角洲盆地。通过盆地油气成藏条件地质综合评价、不同勘探阶段的类比和最终勘探潜力分析，对非洲的沉积盆地进行了划分，在此基础上，总结出非洲油气勘探区选择应遵循的原则。对于油气勘探长期战略选区，原则上，优选低成本油气远景区，即使存在高风险，但亦可获得高回报；对于油气勘探中期发展策略选区，应该寻找地质条件好的油气资源区，投资中短期高利润项目；对于油气勘探中短期发展策略选区，一般应优选中低成本、低风险、低利润且短期能获得油气发现和勘探突破的有利油气勘探区。图1表3参5     

招远金矿集中区金矿富集规律及找矿标志

招远金矿集中区是我国最大的金矿集中区，区内金矿床在时间和空间上的分布规律十分明显。该区矿化类型主要有石英脉型、蚀变岩型及二者之间的过渡类型，其在空间上的分布规律为综合信息找矿及矿床定位预测提供地质信息，并可作为进一步的找矿标志。     

ͬ��б��ˮ��������ȷ����ˮ�����е�Ӧ��

川东地区石炭系气藏的气水界面主要分布在两个范围内，一是潜伏构造气藏的气水界面海拔较深，一般为-3800～-4700m；另一是主体构造气藏的较浅，一般为-1600～-2600m。各构造带之间相邻的潜伏圈闭气藏往往受同一大向斜内的水域相隔，并在原始状态下相互维系了气水的压力平衡，因此同一向斜内某一构造的水井资料就可用于计算另一构造同一气藏的气水界面。基于这种认识，章根据同向斜域内相邻构造的水井资料计算卧龙河、双家坝、云和寨、高峰场、胡家坝等气田的原始气水界面，得到的气水界面与实际误差为-3～-18m。说明该方法在实际应用中可靠性较好，可节省钻井投资，缩短气田的评价周期。     

流体势与油气运聚规律研究——以孤东地区为例

流体势是地下流体所有能的综合表现,不同的流体(如油、气、水)在各自的势场作用下,有各自的势场分布规律运动.通过研究地下流体势空间分布模式,可确定盆地流体系统构成,提高对油气运移规律的认识,明确预测有利油气聚集区,提高钻探成功率.研究表明,孤东地区地下流体势类型分为高势区、低势区,高势区分布与活跃生油洼陷分布一致,是孤东地区油气成藏的主要烃源区和动力源区.低势区与目前的油气田吻合较好.由此可依据流体低势区来预测新的油气聚集部位.      

��ȸ��б��־��ϵ���������������ֲ�����

文章旨在通过沉积相的研究，弄清孔雀河斜坡储盖组合，解决长期以来勘探成功率极低，在油气源充足的情况条件下找不到大油气田的问题。利用单井沉积相分析、典型井岩心分析、野外剖面资料和地震测线资料研究结果，得出了塔里木盆地孔雀河地区志留系沉积特点、演化特征及平面展布规律，指出该区在志留纪的沉积是以滨海—浅海为主的海陆过渡相，在北部区域发育有三角洲；结合单井试油试气资料，研究认为该区的浅海沉积物几乎全部是砂岩，缺少泥岩盖层，因而以前所钻4口探井都以失利告终，这也是长期在该区找不到油气田的症结，而孔雀河1井正好钻在位于北部的三角洲沉积区域，该区地层具有砂、泥互层的特点，具备了较好的储集层和局部盖层，试油结果表明有24个气层，该井的东部及东北部的三角洲区域是今后勘探的有利区域。     

近井带渗透率变化的几种模型讨论

针对钻井液、完井液等液体浸入对近井带地层所造成的伤害,在建立地质模型时,将伤害带进行了各种不同的假设,并定性地绘制出渗透率变化图形,再利用等值渗流阻力方法和裘比公式以及达西定律,得到了各种不同模型下的表皮系数的计算方法。     

西南油气田建设用地面临的困难及其对策

从四川盆地油气勘探开发建设用地特点入手,分析了西南油气田用地现状和新形势下油气勘探开发建设用地在保证工期、控制成本、提高效率、政策支持、关系协调等方面所面临的挑战,提出了下一步为保证生产建设用地按时、有效、科学、合理、合法的取得而应采取的有效措施。     

Structural modelling of coprecipitated VTiO catalysts

A statistical study of the particle shape and size of pure V₂O₅ and TiO₂, and samples of coprecipitated V₂O₅---TiO₂ catalysts with different V/Ti ratios, has been performed. They were also characterized by XRD, EDAX, SEM and XPS. The results showed that pure vanadium pentoxide is compose by large square or needle-shaped particles, while pure titanium dioxide has small and rounded ones. VTiO samples presented an area and shape, depending on the V/Ti ratio.

These results and the spectroscopical characterization conducted to a particle model of the catalysts. Those VOTi samples with high V/Ti ratio would have large V₂O₅ crystals acting as support of a V/TiO₂ solid solution. In contrast, those samples with a low V/Ti ratio, would have the solid solution supporting vanadium pentoxide crystals.